Search found 12 matches

by jefflangendoerfer
Mon Jun 14, 2021 11:05 am
Forum: Announcements
Topic: Version 1.0.0 Released
Replies: 8
Views: 21800

Re: Version 1.0.0 Released

I am still having major issues with this new version. -seams sluggish -G code continues to run even after I stop the program -Freezes up occasionally -It doesnt like to switch from showing G code running to 3d cutting path view -I have to reset it after every run Is any one else experiencing these i...
by jefflangendoerfer
Thu May 06, 2021 1:30 pm
Forum: Announcements
Topic: Version 1.0.0 Released
Replies: 8
Views: 21800

Re: Version 1.0.0 Released

Hello Doug, I had 2 issues with 1.0.0 Installed fine, Rebooted, Ran one short program, and the program finished before the display of G code and axis movement graphics did. Graphics were still running after the program finished. BB Box showed the axis were parked 2nd issue Loaded up a larger program...
by jefflangendoerfer
Sun Nov 22, 2020 9:15 pm
Forum: Post Processors
Topic: Fusion 360 Post Processor
Replies: 17
Views: 52436

Re: Fusion 360 Post Processor

Hello Doug and group.

Could someone point me to the directions on how to download the updated post processor for Fusion360 and install it?

Long story, however short story is that I deleted the original one on my computer.

Thanks!

Jeff Langendoerfer
by jefflangendoerfer
Tue Apr 21, 2020 9:21 am
Forum: Buildbotics Tech Support
Topic: Question regarding machine starting to skip
Replies: 6
Views: 7946

Re: Question regarding machine starting to skip

ps- It did this even after I set the idle power to .75 amps
by jefflangendoerfer
Tue Apr 21, 2020 9:16 am
Forum: Buildbotics Tech Support
Topic: Question regarding machine starting to skip
Replies: 6
Views: 7946

Re: Question regarding machine starting to skip

Hello Doug, as a follow up to our conversation yesterday, I ran the following test last night: I ran my engraving opp 10 times in a row with no shift in position, no stalling, no skipping etc. THEN, after the 10th run and the Spindle parked as it should at 0,0 .394(z height) I clicked the "home" but...
by jefflangendoerfer
Mon Apr 20, 2020 4:41 pm
Forum: Buildbotics Tech Support
Topic: Question regarding machine starting to skip
Replies: 6
Views: 7946

Re: Question regarding machine starting to skip

Hello Doug,

The bug report was too big to attach, so I emailed you directly.

Thanks for all your assistance. as always.

You are top notch.

All the best,

Jeff
by jefflangendoerfer
Fri Apr 17, 2020 2:13 pm
Forum: Buildbotics Tech Support
Topic: Question regarding machine starting to skip
Replies: 6
Views: 7946

Question regarding machine starting to skip

I have my BB running Nema 23's on a small C6040 Chinese Engraver I am experiencing what appears to be one of the motors skipping a step- Here are the details -The machine will run the operation fine, sometimes up to 4 times in a row -Sometimes it appears to skip a step (or more) and when it does, it...
by jefflangendoerfer
Fri Mar 13, 2020 11:18 am
Forum: Buildbotics Tech Support
Topic: Question regarding setting microsteps
Replies: 3
Views: 6913

Re: Question regarding setting microsteps

Thanks Doug and Mick!

I will read up, do some trials and report back.

Have a great weekend!
by jefflangendoerfer
Thu Mar 12, 2020 1:03 pm
Forum: Buildbotics Tech Support
Topic: Question regarding setting microsteps
Replies: 3
Views: 6913

Question regarding setting microsteps

I am using the BB with a C6040 engraver outfitted with NEMA 23 steppers I currently have the microsteps set to 32 and have had no issues, however I do a lot of fine engraving, and am interested to know if setting the steps higher would give me a higher level of precision. Would love input. Thanks! J...
by jefflangendoerfer
Fri Jun 21, 2019 9:47 pm
Forum: Frequently Asked Questions
Topic: How does probing work?
Replies: 17
Views: 55865

Re: How does probing work?

Hello Doug I am having some issues probing. Can you review your notes again below and confirm they are correct? When I read your explanation above, you note that G91 sets the machine to absolute distance mode, however when I search this, I find that G90 is the code for absolute distance mode.. My is...