Search found 12 matches
- Mon Jun 14, 2021 11:05 am
- Forum: Announcements
- Topic: Version 1.0.0 Released
- Replies: 8
- Views: 25165
Re: Version 1.0.0 Released
I am still having major issues with this new version. -seams sluggish -G code continues to run even after I stop the program -Freezes up occasionally -It doesnt like to switch from showing G code running to 3d cutting path view -I have to reset it after every run Is any one else experiencing these i...
- Thu May 06, 2021 1:30 pm
- Forum: Announcements
- Topic: Version 1.0.0 Released
- Replies: 8
- Views: 25165
Re: Version 1.0.0 Released
Hello Doug, I had 2 issues with 1.0.0 Installed fine, Rebooted, Ran one short program, and the program finished before the display of G code and axis movement graphics did. Graphics were still running after the program finished. BB Box showed the axis were parked 2nd issue Loaded up a larger program...
- Sun Nov 22, 2020 9:15 pm
- Forum: Post Processors
- Topic: Fusion 360 Post Processor
- Replies: 18
- Views: 58271
Re: Fusion 360 Post Processor
Hello Doug and group.
Could someone point me to the directions on how to download the updated post processor for Fusion360 and install it?
Long story, however short story is that I deleted the original one on my computer.
Thanks!
Jeff Langendoerfer
Could someone point me to the directions on how to download the updated post processor for Fusion360 and install it?
Long story, however short story is that I deleted the original one on my computer.
Thanks!
Jeff Langendoerfer
- Tue Apr 21, 2020 9:21 am
- Forum: Buildbotics Tech Support
- Topic: Question regarding machine starting to skip
- Replies: 6
- Views: 8305
Re: Question regarding machine starting to skip
ps- It did this even after I set the idle power to .75 amps
- Tue Apr 21, 2020 9:16 am
- Forum: Buildbotics Tech Support
- Topic: Question regarding machine starting to skip
- Replies: 6
- Views: 8305
Re: Question regarding machine starting to skip
Hello Doug, as a follow up to our conversation yesterday, I ran the following test last night: I ran my engraving opp 10 times in a row with no shift in position, no stalling, no skipping etc. THEN, after the 10th run and the Spindle parked as it should at 0,0 .394(z height) I clicked the "home" but...
- Mon Apr 20, 2020 4:41 pm
- Forum: Buildbotics Tech Support
- Topic: Question regarding machine starting to skip
- Replies: 6
- Views: 8305
Re: Question regarding machine starting to skip
Hello Doug,
The bug report was too big to attach, so I emailed you directly.
Thanks for all your assistance. as always.
You are top notch.
All the best,
Jeff
The bug report was too big to attach, so I emailed you directly.
Thanks for all your assistance. as always.
You are top notch.
All the best,
Jeff
- Fri Apr 17, 2020 2:13 pm
- Forum: Buildbotics Tech Support
- Topic: Question regarding machine starting to skip
- Replies: 6
- Views: 8305
Question regarding machine starting to skip
I have my BB running Nema 23's on a small C6040 Chinese Engraver I am experiencing what appears to be one of the motors skipping a step- Here are the details -The machine will run the operation fine, sometimes up to 4 times in a row -Sometimes it appears to skip a step (or more) and when it does, it...
- Fri Mar 13, 2020 11:18 am
- Forum: Buildbotics Tech Support
- Topic: Question regarding setting microsteps
- Replies: 3
- Views: 7072
Re: Question regarding setting microsteps
Thanks Doug and Mick!
I will read up, do some trials and report back.
Have a great weekend!
I will read up, do some trials and report back.
Have a great weekend!
- Thu Mar 12, 2020 1:03 pm
- Forum: Buildbotics Tech Support
- Topic: Question regarding setting microsteps
- Replies: 3
- Views: 7072
Question regarding setting microsteps
I am using the BB with a C6040 engraver outfitted with NEMA 23 steppers I currently have the microsteps set to 32 and have had no issues, however I do a lot of fine engraving, and am interested to know if setting the steps higher would give me a higher level of precision. Would love input. Thanks! J...
- Fri Jun 21, 2019 9:47 pm
- Forum: Frequently Asked Questions
- Topic: How does probing work?
- Replies: 17
- Views: 60235
Re: How does probing work?
Hello Doug I am having some issues probing. Can you review your notes again below and confirm they are correct? When I read your explanation above, you note that G91 sets the machine to absolute distance mode, however when I search this, I find that G90 is the code for absolute distance mode.. My is...