Search found 238 matches

by Doug
Sat Jun 19, 2021 2:49 pm
Forum: Feature ideas
Topic: Touch Screen Monitor support
Replies: 9
Views: 5527

Re: Touch Screen Monitor support

I haven't tried it. If you do, please report back.
by Doug
Sat Jun 12, 2021 11:00 am
Forum: Buildbotics Tech Support
Topic: Control 'Un-homing' itself
Replies: 5
Views: 113

Re: Control 'Un-homing' itself

I learned today that if you click 'Pause' during a probing operation, the machine will estop. I have submitted a github issue on this problem. See https://github.com/buildbotics/bbctrl-f ... issues/301 .

Is it possible that this is what is causing your issue?
by Doug
Sat Jun 12, 2021 10:55 am
Forum: Buildbotics Tech Support
Topic: Onefinity CNC controller parity
Replies: 1
Views: 42

Re: Onefinity CNC controller parity

We have your pull request and will review it.....thanks
by Doug
Sat Jun 12, 2021 10:51 am
Forum: Buildbotics Tech Support
Topic: G81 Bug on Onefinity CNC controller.
Replies: 1
Views: 33

Re: G81 Bug on Onefinity CNC controller.

First, I must mention that the OneFinity controller is not made by Buildbotics. They copied our Open-Source design and proceeded to modify it their liking. Beyond that we have no affiliation with OneFinity or their controller.

I think the problem is that the G98 code in your example is not supported.
by Doug
Sat Jun 12, 2021 10:30 am
Forum: Buildbotics Tech Support
Topic: Bug in stopping an M6
Replies: 1
Views: 42

Re: Bug in stopping an M6

I have partially simulated this, but what I found is that the controller estops if you click 'Pause' rather than 'Stop' during a probing operation (e.g. G38.2 -Z54). I have opened up github issue #301 on this problem. See https://github.com/buildbotics/bbctrl-firmware/issues/301 Note, I also found t...
by Doug
Fri Jun 11, 2021 1:25 pm
Forum: Buildbotics Tech Support
Topic: Control 'Un-homing' itself
Replies: 5
Views: 113

Re: Control 'Un-homing' itself

Yes, an estop will show up in the logs, but the logs are quite cryptic.

If the machine estops for any reason, all homing information will be lost. This can also happen if a limit switch trips for some reason.
by Doug
Sun Jun 06, 2021 5:39 pm
Forum: Buildbotics Tech Support
Topic: Control 'Un-homing' itself
Replies: 5
Views: 113

Re: Control 'Un-homing' itself

I haven't seen this issue. It would be great if you can figure out how to reproduce the problem and send me the sequence of events. I'd also be interested in which browser you are using on your laptop. Finally, if you go to the SETTINGS->ADMIN page, you can generate a bug report. The bug report is a...
by Doug
Thu Jun 03, 2021 4:14 pm
Forum: Buildbotics Tech Support
Topic: Static IP address for wifi and ethernet
Replies: 2
Views: 90

Re: Static IP address for wifi and ethernet

The IP address is assigned by your network router. Most network routers allow you to assign a static IP address to a particular MAC address. Once you do that, It should always be the same.
by Doug
Thu Jun 03, 2021 4:11 pm
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 201

Re: Trouble Upgrading Firmware to v1.0.0

Here is a link to the upgrade file. https://buildbotics.com/bbctrl/bbctrl-1.0.0.tar.bz2 Download this to your computer and then click "Upload" from the General Page. 'Upload' (rather than 'Upgrade') allows you to select a file from your local computer (including from a thumb drive). Do not decompres...
by Doug
Fri May 28, 2021 6:45 pm
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 201

Re: Trouble Upgrading Firmware to v1.0.0

It is likely that the network connection is not strong enough to move the large file without errors. Is it possible to connect the controller to a hardwired ethernet connection. If not, is it possible to move closer to your wifi source?