Search found 6 matches
- Sun May 22, 2022 8:52 am
- Forum: Buildbotics Tech Support
- Topic: external emergency stop paddle wiring
- Replies: 3
- Views: 11204
Re: external emergency stop paddle wiring
I checked the manual, in fact all manuals say that Pin 23 is Estop. I verified that the pin that I am using for ground is in fact case ground Pin 19. when I ground it out I get nothing, do you have any solutions that might fix it? I am using Software update 1.0.3 with a box that is about 2 years old...
- Sat May 21, 2022 3:56 pm
- Forum: Buildbotics Tech Support
- Topic: external emergency stop paddle wiring
- Replies: 3
- Views: 11204
external emergency stop paddle wiring
I am trying to wire in an emergency stop paddle between pin 23 estop on the breakout box and Pin 25 GND, and when I close the circuit nothing happens. What am I doing wrong.
- Wed Mar 02, 2022 5:28 pm
- Forum: Buildbotics Tech Support
- Topic: V1.0.0 BROKEN
- Replies: 3
- Views: 6858
Re: V1.0.0 BROKEN
I do not use the VFD function, I adjust it using the rheostat.
if that is the error that I am getting we are golden.
if that is the error that I am getting we are golden.
- Tue Mar 01, 2022 5:01 pm
- Forum: Buildbotics Tech Support
- Topic: V1.0.0 BROKEN
- Replies: 3
- Views: 6858
Re: V1.0.0 BROKEN
I found a V1.1.0 file on one of the boards, reloaded and everything that I have worked with seems to be working correctly except I still have the error Permanent message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read
- Tue Mar 01, 2022 1:48 pm
- Forum: Buildbotics Tech Support
- Topic: V1.0.0 BROKEN
- Replies: 3
- Views: 6858
V1.0.0 BROKEN
I just downloaded V1.0.0 and it is a hot mess for me, I can run a program as long as it's off a stick drive that I put in the back WIFI does not work now. Permenant message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read no Gcode at all when run...
- Mon Apr 26, 2021 8:01 am
- Forum: Buildbotics Tech Support
- Topic: Stuck in Jogging mode
- Replies: 1
- Views: 4598
Stuck in Jogging mode
If for any reason I stop a program the system will not move or will become stuck in Jogging mode and I can not start another program without first shutting down the buildbotics controller and re homing and re zeroing it.
and help would be appreciated.
and help would be appreciated.