Buildbotics Forum

I checked the manual, in fact all manuals say that Pin 23 is Estop. I verified that the pin that I am using for ground is in fact case ground Pin 19. when I ground it out I get nothing, do you have any solutions that might fix it? I am using Software update 1.0.3 with a box that is about 2 years old...

I am trying to wire in an emergency stop paddle between pin 23 estop on the breakout box and Pin 25 GND, and when I close the circuit nothing happens. What am I doing wrong.

I do not use the VFD function, I adjust it using the rheostat.

if that is the error that I am getting we are golden.

I found a V1.1.0 file on one of the boards, reloaded and everything that I have worked with seems to be working correctly except I still have the error Permanent message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read

I just downloaded V1.0.0 and it is a hot mess for me, I can run a program as long as it's off a stick drive that I put in the back WIFI does not work now. Permenant message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read no Gcode at all when run...

If for any reason I stop a program the system will not move or will become stuck in Jogging mode and I can not start another program without first shutting down the buildbotics controller and re homing and re zeroing it.

and help would be appreciated.