Search found 7 matches

by bustosalex1
Sat Jun 05, 2021 10:09 am
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 5987

Re: Trouble Upgrading Firmware to v1.0.0

It seems that uploading the upgrade file solved the issue. Thanks so much for your help Doug!
by bustosalex1
Tue Jun 01, 2021 7:03 pm
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 5987

Re: Trouble Upgrading Firmware to v1.0.0

Thanks for the response Doug. Unfortunately my controller is already connected via a hardwired ethernet connection. Do you have any other suggestions?
by bustosalex1
Fri May 28, 2021 12:43 pm
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 5987

Re: Trouble Upgrading Firmware to v1.0.0

Hi Doug, Thanks for the reply. Unfortunately, I tried your suggestion several times, each time giving the controller well over 5 minutes to upgrade, and each time it froze and did not complete the upgrade. I tried resetting the configuration on my controller before upgrading as well and unfortunatel...
by bustosalex1
Wed May 26, 2021 7:45 am
Forum: Buildbotics Tech Support
Topic: Trouble Upgrading Firmware to v1.0.0
Replies: 6
Views: 5987

Trouble Upgrading Firmware to v1.0.0

Hi everyone, I'm curious how long I should expect the firmware update to v1.0.0 should take. My controller has been displaying the "Upgrading firmware" message on the LCD display and the "Firmware upgrading Please wait..." message on the web interface for about half an hour now. Is there an issue wi...
by bustosalex1
Sun May 02, 2021 12:51 pm
Forum: Buildbotics Tech Support
Topic: Issues using G53 or G92.2 in Tool Change Script
Replies: 7
Views: 7838

Re: Issues using G53 or G92.2 in Tool Change Script

Hi Doug, Thanks for the response. Yes, that's exactly correct. The G92 offsets are not handled correctly in the simulation, but when running the job (for jobs that fit within the simulation's incorrect interpretation of offsets) they work properly, so I would say that you're good to go ahead and sub...
by bustosalex1
Sat May 01, 2021 1:11 pm
Forum: Buildbotics Tech Support
Topic: Issues using G53 or G92.2 in Tool Change Script
Replies: 7
Views: 7838

Re: Issues using G53 or G92.2 in Tool Change Script

Hi Doug, Skyler, and XCross, Thanks for your responses! Doug, my tool change script is attached below, along with a simple program utilizing a tool change. As you can see, in the Buildbotics web app, my G92 offsets in this example are set to X: 212.302mm, Y: 74.531mm, Z: 65.052mm. My probe is locate...
by bustosalex1
Mon Apr 26, 2021 5:43 pm
Forum: Buildbotics Tech Support
Topic: Issues using G53 or G92.2 in Tool Change Script
Replies: 7
Views: 7838

Issues using G53 or G92.2 in Tool Change Script

Hi everyone, I've got a Buildbotics controller hooked up to my Taig mill and I'm using a toolsetter probe between tool changes to automate the process of measuring new tools for jobs with multiple tools. The probe sits at a fixed point in machine coordinates (I just bolted it to the table), so I am ...