Search found 352 matches
- Wed Aug 25, 2021 7:24 pm
- Forum: Announcements
- Topic: Buildbotics taking preorders
- Replies: 6
- Views: 21454
Buildbotics taking preorders
As many of you know, we have been out of stock on our Buildbotics Controllers recently. I'm happy to report that we plan to have our stock replenished in October and are now taking pre-orders. Our new controllers will have a few hardware differences. They look the same, but have some exciting hardwa...
- Tue Aug 10, 2021 7:43 pm
- Forum: Frequently Asked Questions
- Topic: 0-10v spindle control?
- Replies: 8
- Views: 26890
Re: 0-10v spindle control?
Well, the device that I referenced says it can run on voltages between 12 and 30 VDC. So, if you run your controller at 30 volts or less, you should be able to tap the power off of the Buildbotics power supply. If not, you will need a separate power supply, or a step down converter.
- Mon Aug 09, 2021 10:51 am
- Forum: CNC Machine Retrofits
- Topic: Why use a buildbotics controller
- Replies: 2
- Views: 13805
Re: Why use a buildbotics controller
Sorry for the slow response to this question. I don't really keep up on the capabilities of other controllers and I think our web pages at buildbotics.com give a fairly clear description of our product. You may be able to find the information you are looking for in the product reviews provided by ou...
- Mon Aug 09, 2021 10:31 am
- Forum: Frequently Asked Questions
- Topic: 25-pin I/O Port
- Replies: 3
- Views: 17646
Re: 25-pin I/O Port
The manual has been corrected.
- Mon Aug 09, 2021 9:38 am
- Forum: CNC Machine Retrofits
- Topic: Recommended z touch probe
- Replies: 8
- Views: 22781
Re: Recommended z touch probe
I recommend looking at this thread to get an idea of how to set up probing: https://forum.buildbotics.com/viewtopic.php?f=6&t=117 The BB controller can be set up to execute a series of commands each time a tool change is encountered. Alternatively, you can run a program that just does probing and se...
- Mon Aug 09, 2021 9:24 am
- Forum: Frequently Asked Questions
- Topic: 25-pin I/O Port
- Replies: 3
- Views: 17646
Re: 25-pin I/O Port
Sorry,
It looks like the right side of the image got cut off in our manual. From left to right, the top row of pins is 1 - 13 and the bottom row is pins 14 - 25.
Thanks for pointing this out. We will correct the manual.
Doug
It looks like the right side of the image got cut off in our manual. From left to right, the top row of pins is 1 - 13 and the bottom row is pins 14 - 25.
Thanks for pointing this out. We will correct the manual.
Doug
- Mon Aug 09, 2021 9:20 am
- Forum: Frequently Asked Questions
- Topic: 0-10v spindle control?
- Replies: 8
- Views: 26890
Re: 0-10v spindle control?
We expect the next batch to be available in October. There are some fairly significant hardware changes/improvements. We will be making an announcement soon. The PWM to 0-10V converter that you referenced may not work. It is not clear that it will support a 3.3 Volt PWM signal. If you want to do thi...
- Tue Jul 27, 2021 1:27 pm
- Forum: Buildbotics Tech Support
- Topic: Control 'Un-homing' itself
- Replies: 15
- Views: 12355
Re: Control 'Un-homing' itself
I'm back from vacation. Do you have any updates on this issue? Did the WiFi dongle help?
- Tue Jul 27, 2021 1:14 pm
- Forum: Frequently Asked Questions
- Topic: 0-10v spindle control?
- Replies: 8
- Views: 26890
Re: 0-10v spindle control?
Yes, you can connect a 3.3Volt PWM to 10 Volt converter to the pwm output on the DB25 connector. Here is a link to such a device that I have used. https://www.ebay.com/itm/124779665214?chn=ps&norover=1&mkevt=1&mkrid=711-213727-13078-0&mkcid=2&itemid=124779665214&targetid=4580496732614415&device=c&mk...
- Tue Jul 27, 2021 1:10 pm
- Forum: Feature ideas
- Topic: Machine Profiles Button
- Replies: 2
- Views: 13343
Re: Machine Profiles Button
Are you aware that you can "Backup" and "Restore" configurations from the 'Admin' tab on the 'SETTINGS' page?