Search found 352 matches
- Wed Mar 28, 2018 9:15 am
- Forum: CNC Machine Retrofits
- Topic: Acctek AKM1212 CNC Router
- Replies: 5
- Views: 23086
Re: Acctek AKM1212 CNC Router
I'm glad your motors are all moving. How did you end up connecting the axis that is driven with two motors? The spindle could pose a problem. Communicating via RS485 is only part of the issue. The exact commands are specific to each spindle. Unless, it uses the same protocol as the Huanyang spindles...
- Tue Mar 27, 2018 9:22 am
- Forum: CNC Machine Retrofits
- Topic: Acctek AKM1212 CNC Router
- Replies: 5
- Views: 23086
Re: Acctek AKM1212 CNC Router
Sounds like a fun project. There are three ways that you can hook up two motors for a single axis. 1. Wire the motors in parallel from a single port. This method only works if the motor rating for the individual motors is 3 amps or less because the total current available from a single driver port i...
- Wed Mar 07, 2018 9:02 pm
- Forum: CNC Machine Retrofits
- Topic: Kern laser retrofit
- Replies: 5
- Views: 23529
Re: Kern laser retrofit
It looks like the movement is working well. I think you are asking me questions about laser safety. I must tell you that I have no personal experience with lasers. I do know they are dangerous and can blind you. The glasses that you wear must be designed for the wavelength of the laser. I don't thin...
- Mon Mar 05, 2018 9:56 pm
- Forum: Frequently Asked Questions
- Topic: Wireless connection to the Buildbotics Controller
- Replies: 3
- Views: 28550
Wireless connection to the Buildbotics Controller
Note: Starting with Version 0.3.20, the Buildbotics CNC Controller supports wireless video connections. Just go to the Admin-Network page, select "Client" in the Wifi pull-down menu, enter you network name (SSID), enter your network password, and click "Set". Then disconnect your ethernet cable and...
- Mon Mar 05, 2018 8:42 pm
- Forum: CNC Machine Retrofits
- Topic: Kern laser retrofit
- Replies: 5
- Views: 23529
Re: Kern laser retrofit
You will only need to use two of the four ports on the Buildbotics Controller. Most likely, you will want to connect your X axis to the port labeled X and the Y axis to the port labeled Y. Your motors have eight wires coming out of them because each coil has a separate pair. I noticed from your vide...
- Sun Feb 18, 2018 11:23 am
- Forum: General
- Topic: Who should I contact at Buildbotics for help?
- Replies: 0
- Views: 31073
Who should I contact at Buildbotics for help?
We offer several ways to get in touch with us.
If you need technical support, try posting in the Technical Support forum. Alternatively, send us an e-mail at info@buildbotics.com. Finally, if those don't work try calling us at 1(707)559-8539.
If you need technical support, try posting in the Technical Support forum. Alternatively, send us an e-mail at info@buildbotics.com. Finally, if those don't work try calling us at 1(707)559-8539.
- Sun Feb 18, 2018 11:16 am
- Forum: General
- Topic: Is there a manual for the Buildbotics CNC Controller?
- Replies: 0
- Views: 28849
- Sun Feb 18, 2018 11:14 am
- Forum: Buildbotics Controller technical specifications
- Topic: What are the power requirements for the Buildbotics CNC Controller?
- Replies: 0
- Views: 34745
What are the power requirements for the Buildbotics CNC Controller?
The Buildbotics CNC Controller can accept DC voltages between 12 VDC and 36 VDC. The Buildbotics Controller will sink up to 20 Amps depending on the motors, the motor loads, and the loads on the Load 1 and Load 2 outputs. For more information regarding technical capabilities, please refer to the Bui...
- Sun Feb 18, 2018 10:55 am
- Forum: General
- Topic: How long has Buildbotics LLC been in business?
- Replies: 0
- Views: 26642
How long has Buildbotics LLC been in business?
Buildbotics LLC was founded in August of 2014.
- Sun Feb 18, 2018 10:52 am
- Forum: General
- Topic: Where can I get a Buildbotics CNC Controller?
- Replies: 0
- Views: 26529
Where can I get a Buildbotics CNC Controller?
You can purchase a Buildbotics 4-Axis CNC controller through our web store at:
Https://store.buildbotics.com
Https://store.buildbotics.com