Does anyone know if this VFD is supported?
https://www.amazon.com/dp/B0972MCVV5/?c ... _lig_dp_it
I got the manual from the vendor and it looks like it would work by setting (found on page 56 of attached manual)
P0-00 to 5: 9600 baud
P0-01 to 0: No parity
P0-02 to 1: Local Address of 1??
I'm just not sure how to setup all the functions and what not for the custom MODBUS option in tool settings
any help would be great as this looks like a rather good VFD
SIPUN SPVF-2.2G-S2 Variable Frequency Drive
Forum rules
No gambling, no profanity, no porn. Treat others with dignity and respect. Posts must generally be within the topical area on CNC machines. Violators will be banned without warning or explanation.
No gambling, no profanity, no porn. Treat others with dignity and respect. Posts must generally be within the topical area on CNC machines. Violators will be banned without warning or explanation.
SIPUN SPVF-2.2G-S2 Variable Frequency Drive
- Attachments
-
- VFD-0.75-3.7K User Manual-20210126.pdf
- (3.38 MiB) Downloaded 977 times
Re: SIPUN SPVF-2.2G-S2 Variable Frequency Drive
We do not currently support this VFD.
I took a look at the manual and it appears that they only support a multiword read command. This means that the read format does not appear to be compatible with the read format in the Buildbotics Controller. If this is true, then it is doubtful that we could make the interface work without a software change in the BB Controller.
I took a look at the manual and it appears that they only support a multiword read command. This means that the read format does not appear to be compatible with the read format in the Buildbotics Controller. If this is true, then it is doubtful that we could make the interface work without a software change in the BB Controller.
Re: SIPUN SPVF-2.2G-S2 Variable Frequency Drive
After further review, I think we do stand a good chance of getting this going. I think the multi-word read issue is a non-issue.