HI,
Has anyone already configured Fuling VFD with Builbotics? I have one DZB 300 series which I'm including the manual. I'd like to configure it using RS-485 communication interface, preferably . If someone can be of any help, please.
I'm attaching the link for the VFD manual below:
https://cncu.co.za/EasyRoute-CNC-Router ... Manual.pdf
Fuling VFD
Forum rules
No gambling, no profanity, no porn. Treat others with dignity and respect. Posts must generally be within the topical area on CNC machines. Violators will be banned without warning or explanation.
No gambling, no profanity, no porn. Treat others with dignity and respect. Posts must generally be within the topical area on CNC machines. Violators will be banned without warning or explanation.
Re: Fuling VFD
Version 1.0.3 of the Buildbotics Controller software supports Fuling VFD’s. Just select it from the pull down menu.
-
mauroluciobh
- Posts: 8
- Joined: Wed Apr 20, 2022 10:18 pm
Re: Fuling VFD
Hi Doug,
I received today my controller with the Onefinity CNC. It is updated, running Version 1.0.9, but I could not find the FULING VFD in the tool configuration list. Is there anything I am possibly doing wrong or missing? (I’ve attached the picture of my screen below)
I received today my controller with the Onefinity CNC. It is updated, running Version 1.0.9, but I could not find the FULING VFD in the tool configuration list. Is there anything I am possibly doing wrong or missing? (I’ve attached the picture of my screen below)
-
mauroluciobh
- Posts: 8
- Joined: Wed Apr 20, 2022 10:18 pm
Re: Fuling VFD
Tool configuration list:
Router (Makita)
Laser (J Tech)
PWM Spindle
Unsupported tools
Huanyang VFD
Custom Modbus VFD
Nowforever VFD
Delta
YL600, YL620, YL620-A VFD
FR-D700
Sunfair
OMRON MX2
Router (Makita)
Laser (J Tech)
PWM Spindle
Unsupported tools
Huanyang VFD
Custom Modbus VFD
Nowforever VFD
Delta
YL600, YL620, YL620-A VFD
FR-D700
Sunfair
OMRON MX2
Re: Fuling VFD
We don’t make OneFinity controllers. You need to ask them.
-
mauroluciobh
- Posts: 8
- Joined: Wed Apr 20, 2022 10:18 pm
Re: Fuling VFD
HI Doug, thanks for replying.
Acording to Onefinity website: "Our CNC Controller is based on the Buildbotics open sourced platform. Visit the Buildbotics website to learn more: https://buildbotics.com/"
I understand it uses the Builtbotics controller hardware, but might not be running the same exactly software.
Can you please send me a print of the Buildbotic controller software TOOL CONFIGURATION section that shows the configuration used for the FULING VFD or any manual that shows it? I think I can build a Custom Modbus VFD configuration based on that. It for sure would give me some good informations to start with.
Acording to Onefinity website: "Our CNC Controller is based on the Buildbotics open sourced platform. Visit the Buildbotics website to learn more: https://buildbotics.com/"
I understand it uses the Builtbotics controller hardware, but might not be running the same exactly software.
Can you please send me a print of the Buildbotic controller software TOOL CONFIGURATION section that shows the configuration used for the FULING VFD or any manual that shows it? I think I can build a Custom Modbus VFD configuration based on that. It for sure would give me some good informations to start with.
- Attachments
-
Re: Fuling VFD
Sorry, but I do not provide support for OneFinity.
-
mauroluciobh
- Posts: 8
- Joined: Wed Apr 20, 2022 10:18 pm
Re: Fuling VFD
Hi,
I understand now that you don't provide support for Onefinity and don't take any responsibility for it. Fair enough.
Let's just forget I have the Onefinity and just want one information.
Is it possible to provide, according to the Version 1.0.3, Tools Configuration for the Fuling VFD, what parameters I should change (set) on the VFD. I have these example from the Controller Manual for the Nowforever VFD, as the picture below, and just need the same kind of information for the Fuling DZ3B00 VFD.
I understand now that you don't provide support for Onefinity and don't take any responsibility for it. Fair enough.
Let's just forget I have the Onefinity and just want one information.
Is it possible to provide, according to the Version 1.0.3, Tools Configuration for the Fuling VFD, what parameters I should change (set) on the VFD. I have these example from the Controller Manual for the Nowforever VFD, as the picture below, and just need the same kind of information for the Fuling DZ3B00 VFD.
- Attachments
-