Page 1 of 1
Fuling VFD
Posted: Tue May 03, 2022 11:50 pm
by mauroluciobh
HI,
Has anyone already configured Fuling VFD with Builbotics? I have one DZB 300 series which I'm including the manual. I'd like to configure it using RS-485 communication interface, preferably . If someone can be of any help, please.
I'm attaching the link for the VFD manual below:
https://cncu.co.za/EasyRoute-CNC-Router ... Manual.pdf
Re: Fuling VFD
Posted: Wed May 04, 2022 12:29 pm
by Doug
Version 1.0.3 of the Buildbotics Controller software supports Fuling VFD’s. Just select it from the pull down menu.
Re: Fuling VFD
Posted: Thu May 05, 2022 12:52 am
by mauroluciobh
Thank you so much
Re: Fuling VFD
Posted: Fri May 06, 2022 9:25 am
by mauroluciobh
Hi Doug,
I received today my controller with the Onefinity CNC. It is updated, running Version 1.0.9, but I could not find the FULING VFD in the tool configuration list. Is there anything I am possibly doing wrong or missing? (I’ve attached the picture of my screen below)
Re: Fuling VFD
Posted: Fri May 06, 2022 9:41 am
by mauroluciobh
Tool configuration list:
Router (Makita)
Laser (J Tech)
PWM Spindle
Unsupported tools
Huanyang VFD
Custom Modbus VFD
Nowforever VFD
Delta
YL600, YL620, YL620-A VFD
FR-D700
Sunfair
OMRON MX2
Re: Fuling VFD
Posted: Fri May 06, 2022 5:33 pm
by Doug
We don’t make OneFinity controllers. You need to ask them.
Re: Fuling VFD
Posted: Sat May 07, 2022 1:39 am
by mauroluciobh
HI Doug, thanks for replying.
Acording to Onefinity website: "Our CNC Controller is based on the Buildbotics open sourced platform. Visit the Buildbotics website to learn more:
https://buildbotics.com/"
I understand it uses the Builtbotics controller hardware, but might not be running the same exactly software.
Can you please send me a print of the Buildbotic controller software TOOL CONFIGURATION section that shows the configuration used for the FULING VFD or any manual that shows it? I think I can build a Custom Modbus VFD configuration based on that. It for sure would give me some good informations to start with.
Re: Fuling VFD
Posted: Sat May 07, 2022 6:31 am
by Doug
Sorry, but I do not provide support for OneFinity.
Re: Fuling VFD
Posted: Sat May 07, 2022 8:18 am
by mauroluciobh
Hi,
I understand now that you don't provide support for Onefinity and don't take any responsibility for it. Fair enough.
Let's just forget I have the Onefinity and just want one information.
Is it possible to provide, according to the Version 1.0.3, Tools Configuration for the Fuling VFD, what parameters I should change (set) on the VFD. I have these example from the Controller Manual for the Nowforever VFD, as the picture below, and just need the same kind of information for the Fuling DZ3B00 VFD.