bor 454 DIY

Users creating new developments such as new software features or new hardware interfaces should describe their work here.
Forum rules
No profanity, No gambling. No porn. No illegal activity of any kind. Violators will be removed without notice.
Post Reply
bor MC
Posts: 31
Joined: Wed Mar 04, 2020 2:03 pm
Location: Grandy, NC
Contact:

bor 454 DIY

Post by bor MC » Tue May 04, 2021 3:54 pm

I've been working for months to finish a DIY plan set for my new build and wanted to share.

This mechanical frame is designed using mostly OpenBuilds components/hardware with other easy to source parts. It can be powered by pretty much any controller but was built specifically around the BuildBotics system.

Unlike all other kits in the price range this router is driven by a rack and pinion setup on the X/Y axis making it a truly modular system that can grow with you.

I hope the images post correctly but if not please view them on my Facebook Page https://www.facebook.com/borbuiltnc/ or the build post on OpenBuilds https://openbuilds.com/builds/bor-454-d.9915/

I am currently making plate kits and custom gear racks for folks to build their own. Thanks for checking it out.

MC
454 Assembled.PNG
Elevations.png
Table.png
Pg 3.jpg
X axis front.png
Last edited by bor MC on Wed May 05, 2021 3:42 pm, edited 2 times in total.

User avatar
Doug
Posts: 343
Joined: Fri Feb 02, 2018 4:56 pm

Re: bor 454 DIY

Post by Doug » Wed May 05, 2021 7:58 am

Great job!

bor MC
Posts: 31
Joined: Wed Mar 04, 2020 2:03 pm
Location: Grandy, NC
Contact:

Re: bor 454 DIY

Post by bor MC » Wed May 05, 2021 3:43 pm

Pg 4.jpg
Y Axis.png
Pg 5.jpg
Z axis.png
Pg 6.jpg

bor MC
Posts: 31
Joined: Wed Mar 04, 2020 2:03 pm
Location: Grandy, NC
Contact:

Re: bor 454 DIY

Post by bor MC » Wed May 05, 2021 3:45 pm

Pg 7.jpg
Plate Set.png
CNC Table layout.png
Sorry for the multiple posts, but all the images are her now.

MC

bor MC
Posts: 31
Joined: Wed Mar 04, 2020 2:03 pm
Location: Grandy, NC
Contact:

Re: bor 454 DIY

Post by bor MC » Wed May 05, 2021 3:46 pm

Doug wrote:
Wed May 05, 2021 7:58 am
Great job!
Thank you Doug, means a lot.

Post Reply