I'm open to all critique, always! But this is my first "personal" CNC machine in nearly a decade of contracted builds and operation for hire. It is not exactly what I want it to be, but it will be enough to test new drive components and cut other parts for it's own upgrade.
I'll be testing this with both the Buildbotics controller and the Openbuilds Blackbox. Each has it's own advantages and short comings, so look for the sperate reviews on my facebook page, https://www.facebook.com/bearbuiltnc.
Design Specs:
-Overall Footprint, 60"x120"
-Max Cut Capacity, 50"x100"x4"
-Mech Drive, [4] NEMA 24, 439 oz-in stepper motors
-Linear Drive, Custom Rack and Pinion X/Y axis. [OB] Lead Screw Z axis
-Work holding, Milled Baltic Birch ply vacuum plenum powered by a 6hp canister-shop vacuum
-Spindle/Cutting Head, Bosch Colt or Dewalt 611 trim router
Construction:
-3/4" Plywood table frame and top
-[OB] V slot extrusions for gantry and rails
-[OB] plates, wheels, and hardware where applicable. Custom phenolic XX parts elsewhere
Takes one to make one.
Forum rules
No profanity, No gambling. No porn. No illegal activity of any kind. Violators will be removed without notice.
No profanity, No gambling. No porn. No illegal activity of any kind. Violators will be removed without notice.
Takes one to make one.
Last edited by bor MC on Wed Dec 23, 2020 9:40 pm, edited 49 times in total.
Re: Takes one to make one.
Excellent work. I hope you'll show some pictures of things you make with it.
Re: Takes one to make one.
Been spending the holiday break getting the new machine wired up and ready to run. All that's left is hooking up the limit switches and main power line. Had to run a separate 12v power supply for the switches from OpenBuilds and was lucky enough to find some diodes at a local Radio Shack (yep we still have one). Hope to be testing and tuning in a week or so.
MC
MC
Re: Takes one to make one.
...more pictures.
Re: Takes one to make one.
Got everything hooked up tuned and tested finally. Can't wait to start cutting.
https://youtu.be/zEYa5OkfBWo
https://youtu.be/zEYa5OkfBWo
Re: Takes one to make one.
Nice job. I posted a link to your video on our facebook page.
Re: Takes one to make one.
Finally got the new probe hooked up. Running practice jobs at speed to test the drive system now.
https://youtu.be/3PJtY9oFcDg
https://youtu.be/3PJtY9oFcDg