CNC engraving machine spindle motor replacement

This forum is dedicated to retrofitting existing CNC Machines with Buildbotics Controllers.
Forum rules
Use of profanity is prohibited.
Gambling is prohibited.
Sexual or pornographic material is prohibited.
Illegal activities of any kind are prohibited.
The moderator reserves the right to deny or delete any content without notice.
Post Reply
jack25
Posts: 1
Joined: Fri Apr 12, 2024 12:37 am

CNC engraving machine spindle motor replacement

Post by jack25 » Tue Apr 23, 2024 1:30 am

I needed a new spindle motor for my engraving machine and I found this: https://www.oyostepper.de/goods-802-800 ... ieren.html
Everything about it is good, and all parameters match the original spindle motor of my engraving machine. But its cooling method is water-cooled, while my original spindle motor cooling method is air-cooled. Will there be any impact?

User avatar
Doug
Posts: 349
Joined: Fri Feb 02, 2018 4:56 pm

Re: CNC engraving machine spindle motor replacement

Post by Doug » Tue Apr 23, 2024 11:03 am

If all the specs are the same it should work. However, this is really a question for your VFD vendor to comfirm that the spindle is compatible with the VFD.

Post Reply