Trying to find good stepper motors
Posted: Mon Mar 23, 2020 12:50 am
I've been putting off things because I can't seem to find stepper motors that are even close to accurate that don't miss steps and lose their spots. I was looking at servos but they're $2,000 everywhere I look. I was just converting a Grizzly G0704 for my son to use. The Longs Stepper motors weren't any good at all, constantly losing their position. I was using a Nema 34 for the Z axis and Nema 23s for the X and Y.
Is there anything you would recommend? I can raise and lower the Z axis and be off more than 5mm almost every time or move X and Y and it will be off by 3mm and steadily move to one side.
has anyone bought this site https://www.oyostepper.com/ before, this is a china cnc part site.
Is there anything you would recommend? I can raise and lower the Z axis and be off more than 5mm almost every time or move X and Y and it will be off by 3mm and steadily move to one side.
has anyone bought this site https://www.oyostepper.com/ before, this is a china cnc part site.