I just downloaded V1.0.0 and it is a hot mess for me, I can run a program as long as it's off a stick drive that I put in the back WIFI does not work now.
Permenant message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read
no Gcode at all when running program, Gcode editor does not show anything when a program is loaded
I would like to reload but no wifi can you provide me with a fresh install of the software so that I can do a manual upload.
V1.0.0 BROKEN
Forum rules
No profanity, no gambling, no illegal activity, so sexual or pornographic material.
Posts not related to the Buildbotic CNC Controller are likely to be moved or deleted.
No profanity, no gambling, no illegal activity, so sexual or pornographic material.
Posts not related to the Buildbotic CNC Controller are likely to be moved or deleted.
Re: V1.0.0 BROKEN
I found a V1.1.0 file on one of the boards, reloaded and everything that I have worked with seems to be working correctly except I still have the error Permanent message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read
Re: V1.0.0 BROKEN
Here are a few questions:
- Do you have a VFD?
- If so, what type?
- What type is assigned on Settings->Tool page?
- Are errors counting up in tool page?
Re: V1.0.0 BROKEN
I do not use the VFD function, I adjust it using the rheostat.
if that is the error that I am getting we are golden.
if that is the error that I am getting we are golden.