V1.0.0 BROKEN

Post technical questions about the Buildbotic Controller here.
Forum rules
No profanity, no gambling, no illegal activity, so sexual or pornographic material.

Posts not related to the Buildbotic CNC Controller are likely to be moved or deleted.
Post Reply
wilsonedw
Posts: 6
Joined: Sat Apr 03, 2021 3:50 am

V1.0.0 BROKEN

Post by wilsonedw » Tue Mar 01, 2022 1:48 pm

I just downloaded V1.0.0 and it is a hot mess for me, I can run a program as long as it's off a stick drive that I put in the back WIFI does not work now.
Permenant message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read
no Gcode at all when running program, Gcode editor does not show anything when a program is loaded

I would like to reload but no wifi can you provide me with a fresh install of the software so that I can do a manual upload.

wilsonedw
Posts: 6
Joined: Sat Apr 03, 2021 3:50 am

Re: V1.0.0 BROKEN

Post by wilsonedw » Tue Mar 01, 2022 5:01 pm

I found a V1.1.0 file on one of the boards, reloaded and everything that I have worked with seems to be working correctly except I still have the error Permanent message warning COMM SRC/modbus.c:257 repeat is counting up, message:0 OK: modbus: unexpected response to read

User avatar
Doug
Posts: 343
Joined: Fri Feb 02, 2018 4:56 pm

Re: V1.0.0 BROKEN

Post by Doug » Wed Mar 02, 2022 7:47 am

Here are a few questions:
  • Do you have a VFD?
  • If so, what type?
  • What type is assigned on Settings->Tool page?
  • Are errors counting up in tool page?

wilsonedw
Posts: 6
Joined: Sat Apr 03, 2021 3:50 am

Re: V1.0.0 BROKEN

Post by wilsonedw » Wed Mar 02, 2022 5:28 pm

I do not use the VFD function, I adjust it using the rheostat.

if that is the error that I am getting we are golden.

Post Reply