Page 1 of 1

What are the power requirements for the Buildbotics CNC Controller?

Posted: Sun Feb 18, 2018 11:14 am
by Doug
The Buildbotics CNC Controller can accept DC voltages between 12 VDC and 36 VDC. The Buildbotics Controller will sink up to 20 Amps depending on the motors, the motor loads, and the loads on the Load 1 and Load 2 outputs.

For more information regarding technical capabilities, please refer to the Buildbotics User Manual located at:

https://buildbotics.com/upload/Buildbot ... 170912.pdf