Web UI component toggling

Post any suggestions that you have for new features and enhancements for the Buildbotics Controller here.
Post Reply
d8ad0rk
Posts: 2
Joined: Sun Jan 03, 2021 7:59 am

Web UI component toggling

Post by d8ad0rk » Tue Jan 05, 2021 6:37 pm

I added a separate display with another raspberry pi in kiosk mode so i can see the simulation\status of the cut from across the garage. The issue is that I would like to toggle components off on this display and only retain things like the position information, machine running state table, the Auto tab with the Path View size large.

I looked at the code base for this and it is beyond my skillset to add another page template and do the build to generate it. Not sure how complex a customizable display would be from a toggle components on or off would be. Additionally it would be nice on a remote display to not pop modal dialogs as there are no input devices on my remote kiosk display.

User avatar
Joe
Site Admin
Posts: 8
Joined: Fri Feb 02, 2018 2:00 pm
Location: Petaluma, CA
Contact:

Re: Web UI component toggling

Post by Joe » Fri Jan 15, 2021 9:09 pm

We don't have any easy way to support this right now. As you noted, it's Open-Source so you could change the code. Sorry I cannot help more than that.

Post Reply