Buildbotics Forum

I am wondering if it is possible to indicate when the touch probe is activated. Before I run my Z probe macro, I like to test that it is working by hitting the touch block to the bit. Presently, I change to the indicator tab and scroll down to see the little +/- change state. This is not very handy on a touch screen. Can I trigger a message box and/or change the color of the macro button when this gets triggered. Something like what the Onefinity controller web-page does, indicate when it is true on screen. Ideally I would have a pop-up message box saying "Test The Probe" and an indicator check box before hitting continue.
Thanks,