Rotary axis
Forum rules
No profanity, no gambling, no illegal activity, so sexual or pornographic material.
Posts not related to the Buildbotic CNC Controller are likely to be moved or deleted.
No profanity, no gambling, no illegal activity, so sexual or pornographic material.
Posts not related to the Buildbotic CNC Controller are likely to be moved or deleted.
Rotary axis
Is it possible to use vcarve and a Y to A wrap post processor to be able to use a rotary axis with the buildbotics controller after changing to the correct step-angle and travel-per-rev? I am trying to just use the X-axis and then the A axis instead of the Y axis.
Re: Rotary axis
It is possible to adjust the travel-per-revolution to mimic a rotary axis. I have no experience with VCarve.
Maybe some of the VCarve experts can weigh in on this one?
Maybe some of the VCarve experts can weigh in on this one?
Re: Rotary axis
I got it to work today. I just had to adjust those values in the motor settings and used a modified post processor to wrap the Y axis to the A axis. Glad to see it working great.
-
- Posts: 2
- Joined: Fri Jan 29, 2021 6:14 pm
Re: Rotary axis
I have the buildbotics working for over a year now on a wood cnc with amazing results. I want to add the rotary 4th axis but I'm not clear on the setup. The vectric post processor is not for wraps as far as i can see. So do I deactivate the Y axis motor and activate the rotary as Y? Any help would be appreciated
Re: Rotary axis
It seems to me that it would be useful to keep the Y axis active so you can jog into the correct Y position after you get your work piece set in place. Are you also using Vectric? I think I know what you mean, but just to be sure can you describe the term 'wrap'?