DynaMyte 2400 retrofit HowTo Video

This forum is dedicated to DynaMyte CNC Mill retrofits with Buildbotics Controllers
Post Reply
User avatar
Doug
Posts: 153
Joined: Fri Feb 02, 2018 4:56 pm

DynaMyte 2400 retrofit HowTo Video

Post by Doug » Wed Feb 07, 2018 10:04 pm

I have successfully retrofitted two DynaMyte 2400 CNC Mills with Buildbotics CNC Controllers. There seems to be quite a bit of interest in this topic, so I created a How-To video to describe how it's done. The video is available on Youtube at the following link:

https://www.youtube.com/watch?v=TcufoZNXkto

A script with the full text of the video along with images used in the video is attached.

I think the script will make a useful reference document for anyone that decides to duplicate my efforts.

Comments and suggestions are welcome.
Attachments
Video Script.pdf
(2.42 MiB) Downloaded 263 times

tadol
Posts: 1
Joined: Thu Feb 08, 2018 1:17 pm

Re: DynaMyte 2400 retrofit HowTo Video

Post by tadol » Thu Feb 08, 2018 4:47 pm

It was fun running it thru its paces today - I think this is gonna be a fantastic retrofit for all Dyna Myte mill owners out there!

User avatar
Doug
Posts: 153
Joined: Fri Feb 02, 2018 4:56 pm

Re: DynaMyte 2400 retrofit HowTo Video

Post by Doug » Fri Feb 16, 2018 4:47 pm

Joe and I are still working out a few kinks. We should have it back to you soon.

Shindog
Posts: 1
Joined: Tue Feb 20, 2018 12:49 pm

Re: DynaMyte 2400 retrofit HowTo Video

Post by Shindog » Tue Feb 20, 2018 12:51 pm

Really, looking forward to getting my DM2400 running G-code. It's been a long time sitting idly in the corner. Time to dust it off again!

--shindog

Post Reply